OPTIONS	Command, Raid and Deployment Van PACKAGE - OPTIONAL EQUIPMENT that can be added if not included in the package above.
Alternator upgrade	High power alternator upgrade installed as a direct bolt on
Rear Battery	Add a deep cycle sealed AGM battery to rear of van and wire to front through isolator
Ignition override	Ignition over-ride system operating from a switch on the dash or console which allows the keys to be removed and the vehicle left running while locked and in park.
Jump Start	Commercial Duty Jump Start system in Grille wired to battery with connection for jumper cables, winch etc
HD bumper & Grille Guard	Remove OEM front bumper and add custom 1/4" steel push bumper with 1/2" teflon face and grille guard
Add 12K winch	Add a 12,000 lb winch to the HD bumper with remote control.
Back up alarm	Backup Alarm: Automatically sound level adjusting back up alarm wired to the reverse circuit.
Shoreline: 20A auto eject	20 amp auto-eject receptacle mounted on the left rear side of the vehicle wired to eject when the key is in the "start" position. Included is a junction box with circuit breaker protection and one multi outlet strip for equipment
Shoreline 30A twistlock	Shoreline: 30 amp twist-lock marine receptacle mounted on the left rear side of the vehicle wired to a junction box with circuit breaker protection and two multi outlet strips for equipment.
Shoreline indicator light - int	Shoreline: Power on indicator mounted on the console or dash activated when power is applied to the shore line.
Shoreline indicator light - ext	Power on indicator mounted on the exterior next to the shore power inlet activated when power is applied to the shore line.
Underhood line	Circuit protected line terminating under the hood for an existing engine block heater. (heater is not included.) (If conversion is an EMS unit that will have an interior heater and block heater please use the 20 or 30 amp shoreline.)
30A batt charger	30 amp taper charger/monitor wired into shore line to maintain all batteries while on shore line without over charging.
Inverter: 1000w mod sine & install	Modified wave: 1000 watt inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
Inverter: 2000w mod sine & install	Modified wave: 2000 watt inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
Inverter: 1000w pure sine & install	1000 watt Pure Sine Wave inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
Inverter: 2000w pure sine & install	2000 watt Pure Sine Wave inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
30A transfer switch	Automatic transfer switch located in the rear of the vehicle and wired to automatically transfer power from an on board inverter or a generator to the shore line when power is applied to the shore line.
Graphics Std Van	All reflective material is 3M Scotchlite 680 and high quality custom vinyl material. Included is a Scotchlite stripe and up to 60 single color Scotchlite letters. A detailed color drawing will be submitted for approval after the order is placed.
Computer mount non dock	Heavy duty swivel mount with lap top tray and hold downs secured to the passenger side of the console. This is not a computer docking station.
SL-20X flashlight	One Streamlight SL-20X black aluminum full size flashlight with charging rack installed on the passenger side of the front console and wired to constant power.
Green command strobe	Green strobe mounted directly to the roof at the rear of the vehicle wired to a separate switch on the console.
SL-40 Light box flashlight	Streamlight SL-40 orange light box with charging rack installed and wired located in the rear of the vehicle in a location to be determined when the production plan is approved.
5lb abc fire extinguisher & bracket	Fire extinguisher mounted in the rear of the vehicle in a location to be determined when the production plan is approved, 5 lb. ABC
Vehicle Remote start & security	Remote control units attached to the key chain that will operate the existing power door locks and allow you to start the vehicle from a distance. The vehicle will remain running with any accessories left on (i.e.: heat, defroster or air conditioning.) or 20 minutes or until the ignition circuit is activated.
Rear Camera System	Rear view color backup camera
Command Chute	Custom cover attaching to the rear of the vehicle to protect the rear area when the doors or hatch are open.
Radio install - Single	Customer supplied, install a single unit radio in the console and wire to an antenna on the roof.
Radio install - dual	Customer supplied, install dual head radio with one head installed in the console and the second head in the rear command area, wired to an antenna on the roof.
Portable charger install	Customer supplied portable radio charger in the console pocket and wire to constant power.
Scanner BC350 & install	Supply and install a Uniden BC350 scanner in the console.
GPS unit	Supply and install a Magellan, Gramin or TomTom GPS system with voice and countrywide software mounted by the console near the dash.