OPTIONS	SUV PACKAGE - OPTIONAL EQUIPMENT that can be added if not included in the SUV packages.
Ignition override	Ignition over-ride system operating from a switch on the dash or console which allows the keys to be removed and the vehicle left running while locked and in park.
Back up alarm	Backup Alarm: Automatically sound level adjusting back up alarm wired to the reverse circuit.
Shoreline 15A Straight	Shoreline: 15 amp, standard straight blade weatherproof inlet mounted on the exterior of the vehicle and wired to a junction box with circuit breaker protection and one multi outlet strip for equipment.
Shoreline 15A auto eject	Shoreline: 15 amp auto-eject receptacle mounted on the left rear side of the vehicle wired to eject when the key is in the "start" position. Included is a junction box with circuit breaker protection and one multi outlet strip for equipment.
Shoreline: 20A auto eject	20 amp auto-eject receptacle mounted on the left rear side of the vehicle wired to eject when the key is in the "start" position. Included is a junction box with circuit breaker protection and one multi outlet strip for equipment
Shoreline 30A twistlock	Shoreline: 30 amp twist-lock marine receptacle mounted on the left rear side of the vehicle wired to a junction box with circuit breaker protection and two multi outlet strips for equipment.
Shoreline indicator light - int	Shoreline: Power on indicator mounted on the console or dash activated when power is applied to the shore line.
Shoreline indicator light - ext	Power on indicator mounted on the exterior next to the shore power inlet activated when power is applied to the shore line.
Underhood line	Circuit protected line terminating under the hood for an existing engine block heater. (heater is not included.) (If conversion is an EMS unit that will have an interior heater and block heater please use the 20 or 30 amp shoreline.)
30A batt charger	30 amp taper charger/monitor wired into shore line to maintain all batteries while on shore line without over charging.
Inverter: 1000w mod sine & install	Modified wave: 1000 watt inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
Inverter: 2000w mod sine & install	Modified wave: 2000 watt inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
Inverter: 1000w pure sine & install	1000 watt Pure Sine Wave inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
Inverter: 2000w pure sine & install	2000 watt Pure Sine Wave inverter installed in the rear of the vehicle wired to one outlet strip and an on/off switch on the console or rear radio area.
30A transfer switch	Automatic transfer switch located in the rear of the vehicle and wired to automatically transfer power from an on board inverter or a generator to the shore line when power is applied to the shore line.
Graphics Std Suv	All reflective material is 3M Scotchlite 680 and high quality custom vinyl material. Included is a Scotchlite stripe and up to 60 single color Scotchlite letters. A detailed color drawing will be submitted for approval after the order is placed.
Computer mount non dock	Heavy duty swivel mount with lap top tray and hold downs secured to the passenger side of the console. This is not a computer docking station.
SL-20X flashlight	One Streamlight SL-20X black aluminum full size flashlight with charging rack installed on the passenger side of the front console and wired to constant power.
Overhead speaker console	Custom fabricated and upholstered overhead console mounted on the ceiling between the driver and passenger seats including three Motorola speakers behind a custom panel covered with black speaker cloth.
TAM-85RR Traffic Advisor	Whelen Traffic Advisor, #500 Super LED with colored end flashers - model #TAM-85RR with 6 amber LED flashers and red LED lights on each end mounted on the rear of the roof direct bolted with rubber mounts and wired to the control box mounted in the console wired to operate with the flasher circuit.
Green command strobe	Green strobe mounted directly to the roof at the rear of the vehicle wired to a separate switch on the console.
Two Grille 700 split led lights	Two split double LED flashers with flanges mounted on the grille and wired to flash and a switch on the console, 4 LED flashers total, red, blue or amber.
Two 700 split led intersect lts	Double LED on fenders: intersection lights with chrome flanges mounted on the front fenders wired to the power supply and a switch on the control console, two lights total.
Two Behind glass slimlighters	One Whelen SlimLighter Super dual LED light behind each side rear window, total of 4 LED lights, color red/clear or (red/amber), (red/blue)or any other combination
One Behind glass slimlighter	One double LED unit mounted to the top of the hatch at the rear window, total of 2 LED lights, color red/clear or (red/amber), (red/blue)or any other combination
Rear bumper floods 500 series	Two halogen flood lights with flanges recess mounted into the rear bumper operating with reverse and the same momentary cancel switch as the rear door or hatch floods when included in the conversion.
Upgrade to Cencom Siren	Whelen CenCOM siren and light controller with three position selector switch and independent switches for other lighting functions. If past of the package the CenCom can control the rear arrow functions also saving space on the console for radios and computer equipment.
SL-40 Light box flashlight	Streamlight SL-40 orange light box with charging rack installed and wired located in the rear of the vehicle in a location to be determined when the production plan is approved.
5lb abc fire extinguisher & bracket	Fire extinguisher mounted in the rear of the vehicle in a location to be determined when the production plan is approved, 5 lb. ABC
Vehicle Remote start & security	Remote control units attached to the key chain that will operate the existing power door locks and allow you to start the vehicle from a distance. The vehicle will remain running with any accessories left on (i.e.: heat, defroster or air conditioning.) or 20 minutes or until the ignition circuit is activated.
Command Chute	Custom cover attaching to the rear of the vehicle to protect the rear area when the doors or hatch are open.
Radio install - Single	Customer supplied, install a single unit radio in the console and wire to an antenna on the roof.
Radio install - dual	Customer supplied, install dual head radio with one head installed in the console and the second head in the rear command area, wired to an antenna on the roof.
Portable charger install	Customer supplied portable radio charger in the console pocket and wire to constant power.
Scanner BC350 & install	Supply and install a Uniden BC350 scanner in the console.
GPS unit	Supply and install a Magellan, Gramin or TomTom GPS system with voice and countrywide software mounted by the console near the dash.